| PRIME CONTRACTOR | SPECIFICATION | PROCESS | CODE |
| APPROVALS: | |||
| BOEING | AMS 2658 | Hardness and Conductivity Inspection of Wrought Aluminum Alloy Parts (Hardness Testing) | 806B |
| BOEING | AMS 2469 | Hard Coating Aluminum | 300B |
| BOEING | AMS 2430 | Shot Peening | 507 |
| BOEING | ASTM-B-117 | Salt Spray Testing | 810 |
| BOEING | ASTM-E-1417 | Penetrant Inspection | 411 |
| BOEING | ASTM-E-1444 | Magnetic Particle Inspection | 402 |
| BOEING | BAC 5019 | Chromic Acid Anodizing - Class 1 and 3 | 305 |
| BOEING | BAC 5019 | Chromic Acid Anodizing - Class 5 | 317 |
| BOEING | BAC 5022 | Sulfuric Acid Anodizing - Grade A Only | 306 |
| BOEING | BAC 5423 | Penetrant Inspection | 410 |
| BOEING | BAC 5424 | Magnetic Particle Inspection | 400 |
| BOEING | BAC 5617 | Heat Treat of Alloy Steels | 101 |
| BOEING | BAC 5619 | Heat Treat of Corrosion Resistant Steel | 131 |
| BOEING | BAC 5626 | Colored Chem Conversion Coatings for Alum Immersion App only | 325 |
| BOEING | BAC 5632 | Boric Acid - Sulfuric Acid Anodizing Class 1 | 315 |
| BOEING | BAC 5632 | Boric Acid - Sulfuric Acid Anodizing Class 5 | 318 |
| BOEING | BAC 5650 | Hardness Testing BAC 5650 | 806A |
| BOEING | BAC 5665 | Applicaton of Sol-Gel Conversion Coatings on Corrosion Resistant Alloys for Painting | 323 |
| BOEING | BAC 5719 | Chemical Conversion Coatings for Aluminum (Immersion Application Only) | 321 |
| BOEING | BAC 5730 | Shot Peening | 500 |
| BOEING | BAC 5753 | Cleaning - Descaling of Titanium - Method II Only | 510 |
| BOEING | BAC 5793 | Application Corrosion Resistant Finish for Integral Fuel Tanks - manual touch-up excluded for requiring approval | 392 |
| BOEING | BAC 5821 | Hard Anodizing - Class 1 and 2 | 308 |
| BOEING | BAC 5861 | Phosphate Fluoride Coatings - Titanium | 383 |
| BOEING | BAC 5884 | Anodizing of Aluminum Alloys | 313 |
| BOEING | BAC 5946 | Temper Inspection of Non-ferrous alloys | 806 |
| BOEING | BSS 7039 | Liquid Penetrant Inspection | 410A |
| BOEING | BSS 7040 | Magnetic Particle Inspection | 400A |
| BOEING | Chem. Testing | Process Solution Control | 809 |
| BOEING | Mech. Testing | Mechanical Testing - Metallic | 802 |
| BOEING | MIL-A-8625 | Chromic Acid Anodizing of Alum. - Type I | 300 |
| BOEING | MIL-A-8625 | Type IC Boric Sulfuric Anodize | 300D |
| BOEING | MIL-A-8625 | Sulfuric Acid Anodize Type II (Approval Not Required for International Space Station (ISS) Houston Only) | 301 |
| BOEING | MIL-A-8625 | Anodize Type IIB Boric Sulfuric Anodize | 301B |
| BOEING | MIL-A-8625 | Hard Anodize Type III | 302 |
| BOEING | MIL-DTL-5541 | Chemical Conversion Coating on Aluminum (Immersion App Only) | 320B |
| BOEING | MIL-PRF-8625 T1, T1B, T1C, T2, T2B, T3 | Anodic Coatings for Aluminum and Aluminum Alloy | 303 |
| BOEING | MIL-STD-410 | NDI Personnel Certification Level 3 Magnetic | 849A |
| BOEING | MIL-STD-410 | NDI Personnel Certification Level 3 Penetrant | 849B |
| BOEING | MIL-STD-1949 | Magnetic Particle Inspection | 403 |
| BOEING | NAS 410 | NDI Personnel Certification Level III Magnetic | 848A |
| BOEING | NAS 410 | NDI Personnel Certification Level III Penetrant | 849A |
| BOEING | Quality System | Processor Basic Quality System for D1-4426 approval only | 001 |
| BOEING - MESA | EPB 4-230 | Finish Specification for AH-64 Advanced Attack Helicopter | |
| BOEING - MESA | EPB 4-232 | Paint Application of, to the AH–64 Helicopter | |
| BOEING - MESA | EPB 4-235 | Finish Specification for Light Helicopters | |
| BOEING - MESA | HP 4-57 | Chemical Film - Aluminum (Immersion Application Only) | M325 |
| BOEING - MESA | HP 6-13 | Penetrant Inspection - Fluorescent | M410A |
| BOEING - MESA | HP 9-24 | Cleaning and Etching of Metals for Penetrant Inspection (Limited to Type I) | |
| BOEING ST. LOUIS | P.S. 13201 | Anodizing Aluminum | S304 |
| BOEING ST. LOUIS | P.S. 13208 | Hard Coat - Aluminum | S306 |
| BOEING ST. LOUIS | P.S. 13209 | Coating - Multicolored Chemical Conversion of Aluminum Alloys by Immersion | S325 |
| BOEING ST. LOUIS | P.S. 14023 | Peening | S500 |
| BOEING ST. LOUIS | P.S. 15063 | HT Steel - Stress - Embrittlement Relief (Limited to Embrittlement Relief Only) | S103A |
| BOEING ST. LOUIS | P.S. 18021 | Application - Dry Film Lubricant | S391 |
| BOEING ST. LOUIS | P.S. 20722 | Hole Masking for Enhanced Process Controlled Metallic Parts | |
| BOEING ST. LOUIS | P.S. 21201 | Magnetic Particle Inspection | S400 |
| BOEING ST. LOUIS | P.S. 21202 | Penetrant Inspection - Aluminum | S410A |
| BOEING ST. LOUIS | P.S. 21202 | Penetrant Inspection - Cobalt - Nickel | S410C |
| BOEING ST. LOUIS | P.S. 21202 | Penetrant Inspection - Low Alloy Steels | S410E |
| BOEING ST. LOUIS | P.S. 21202 | Penetrant Inspection - Stainless Steels | S410H |
| BOEING ST. LOUIS | P.S. 21202 | Penetrant Inspection - Titanium | S410J |
| BOEING ST. LOUIS | P.S. 21203 | Hardness Testing of Parst and Materials | S806B |
| BOEING ST. LOUIS | P.S. 21207 | Eddy Current Determination of Electrical Conductivity for Aluminum Alloys | S806A |
| PAINT AND ORGANIC COATING SPECIFICATIONS, NO APPROVAL REQUIRED: | |||
| BOEING | BAC 5325 | Application of Nonchromated Primer on Composite, Plastic, Titanium and Cres Surfaces | |
| BOEING | BAC 5706 | Application of Organic Finishes | |
| BOEING | BAC 5710 | Application of Special Purpose Coatings | |
| BOEING | BAC 5736 | Application of Chemical and Solvent Resistant Finishes | |
| BOEING | BAC 5755 | Application of Interior Decorative Finishes | |
| BOEING | BAC 5756 | Application of Heat-Treat Protective Coatings - Type IV | |
| BOEING | BAC 5777 | Wash Primer, Application of | |
| BOEING | BAC 5793 | Application of Corrosion Resistant Finish for Integral Fuel Tanks | |
| BOEING | BAC 5845 | Application of Polyurethane Enamel | |
| BOEING | BAC 5882 | Application of Urethane Compatible Primer | |
| BOEING | BAC 5896 | Application of Aliphatic Isocyanate Polyurethane Enamel | |
| BOEING | D210-12534-1 | Coating System, Epoxy-Polyamide, Chemical and Solvent Resistant: Process for Application of | |
| BOEING - ST. LOUIS | P.S. 13375 | Application of Epoxy Primer | |
| BOEING - ST. LOUIS | P.S. 13517 | Painting of Douglas Commercial, C-17, T-38 and T-45 Aircraft | |
| BOEING - ST. LOUIS | P.S. 13525 | Polyurethane Corrosion Resistant Coating, Spray Application of | |
| BOEING - ST. LOUIS | P.S. 13555 | Coating, Anti-Chafe | |
| BOEING - ST. LOUIS | P.S. 13630 | Painting of F/A-18 and AV-8 Aircraft | |
| BOEING - ST. LOUIS | P.S. 13630.1 | Painting at Detail and Assembly Level | |
| BOEING - ST. LOUIS | P.S. 13646 | Painting of F-15 Aircraft | |
| BOEING - ST. LOUIS | P.S. 13646.1 | Finishes for Missiles and Associated Equipment | |
| OTHER PROCESSES - NO APPROVAL REQUIRED: | |||
| BOEING | BAC 5625 | Surface Treatments for Ferrous Alloys | |
| BOEING | BAC 5748 | Abrasive Cleaning, Deburring, and Finishing | |
| BOEING | BAC 5756 | Application of Heat-Treat Protective Coatings - Type IV | |
| BOEING | BAC 5786 | Etch Cleaning of Aluminum Alloys | |
| BOEING | BAC 5811 | Dry Film Lubricant - Excluding Type VIII | |
| BOEING | ST0110LA0006 | Cleaning of Corrosion and Heat Resistant Alloys | |
| BOEING - MESA | HP 9-1 | Abrasive Cleaning Methods for Metallic and Nonmetallic Parts | |
| BOEING - ST. LOUIS | P.S. 13001 | Passivation of Corrosion and Heat Resisting Alloys | |
| BOEING - ST. LOUIS | P.S. 18059 | Preparation and Application of Solid Film Lubricants (DPS 3.177) | |
| BOEING - ST. LOUIS | P.S. 12030 | Cleaning, Alkaline | |
| BOEING - ST. LOUIS | P.S. 12040 | Cleaning, Abrasive | |
| BOEING - ST. LOUIS | P.S. 12050.1 | Pickling Aluminum Alloys | |
| BOEING - ST. LOUIS | P.S. 12050.5 | Pickling Stainless Steel | |
| BOEING - ST. LOUIS | P.S. 12050.6 | Pickling Titanium and Titanium Alloys | |
| BOEING - ST. LOUIS | P.S. 13204 | Conversion Coating, Brush and Spray | |
Customer Portal
3P Approved for Boeing PS 20722
3P Processing is now approved for Boeing PS 20722!
Submit quotes via our RFQ Form or by sending us an email.
New Process Approvals
Virtual Tour
Tour our Facility!
Powered by:
3P Careers
For Current and Prospective Employees